The Alexandra team are here to help...
Alexandra Security Staff Member Alexandra Security Staff Member Alexandra Security Staff Member Alexandra Security Staff Member
Enquire About SiteGard® – Double Leaf Mesh Temporary Gate

Our experienced staff are always ready to help and share their personal expertise to guide you to the right perimeter security solution.

01892 833 001

or Email:


    SiteGard® – Double Leaf Wire Mesh Gate

    Effectively secure vehicle entrances at your site with the Alexandra Security double-leaf SiteGard.

    Available in sizes from 3m wide, all the way up to 8m wide, these gates can be installed using either dig-in, base-plated or strapped posts, allowing for a secure install no matter the type of ground at your site. The gate, frames and posts are all powder coated black, protecting the steel and providing a long-lasting high-quality finish.

    Preserve The Privacy Of Your Site

    While SiteGard construction gates allow clear vision through the gate, providing additional safety from other pedestrians and, they are also designed to be anti-climb, due to the flat wire weld-mesh. In addition, this double-leaf temporary gate can also easily be clad with ply allowing for increased extra privacy for your site, and an extra layer of security.

    Secure Mounting System

    In situations where dig-in posts are not allowed or the ground isn’t suitable, SiteGard gate posts can be securely mounted onto concrete blocks using our heavy-duty corner straps. This makes them idea for use on no-dig construction sites, or sites where the access points regularly change.

    These single-piece mild steel straps are precisely laser-folded to match SiteGard gate posts, while also being powder-coated to match the finish of the gate. Straps can be fitted to suit any variation dependent on where the concrete block sits in relation to the gates, and are strong enough to hold our largest 8m Sitegard bi-fold double-leaf gate.

    Safety As Standard

    All SiteGard gates also come with gate restrainers, a simple but essential safety device to prevent the gate failing should the top or bottom hinge fail. These retrainers comply with BS EN 12604 and are tested on gates up to 500kg.

    Temporary Works Approved

    Temporary Works ApprovedThe full range of SiteGard standard gates and post sets are Temporary Works Approved. This takes into account wind loadings for all mainland UK wind zones as well as notional crowd loadings, in accordance with Temporary Works Forum (TwF) guidance. The calculations have been carried out using British Standards design codes.

    Reusable And Recyclable

    Here at Alexandra Security, we are proud of the high standard our SiteGard gates are manufactured to in our own UK workshops. Unlike other site gates, SiteGard gates, frames and posts are all powder coated black, protecting the steel and providing a long-lasting high-quality finish. This attention to detail means our gates can survive heavy use on site and are often reusable at the end of a project.

    Our SiteGard range are also recyclable, reducing waste when you finish with your construction project, if you choose not to reuse the gate. We hold stock of common SiteGard sizes at our depot in Kent, meaning you can order, collect and install your gate at your site on the same day. For sites further afield, transport can be arranged for delivery and unloaded directly to your site, usually within 48 hours.

    SiteGard Technical

    More Info


    Product and Finish Standards

    • Framework and posts powder-coated black over steel
    • The gate spec detailed below is: 2.4m high x 6.0m wide (actual size 2.4m high x 6.22m wide) clad with weldmesh. Gate set includes two dig in type posts, padlockable slidelatch,
      two drop-bolts and 4no adjustable hinges.


    • Concrete Former Box: Where the drilling of base plates isn’t an option, Alexandra can provide concrete former boxes for the customer to use to construct supports for their temporary gates.
    • Base plated
    • Straps to bolt on to concrete posts